Control & Interface modules give the intermediate automation solution between higher & lower end control solutions. Electronic counters , Process indicators , Signal converters are the state of the art technology modules which can be used in industrial automation

	Electronic Counters
		Various Electronic counter modules features not only the counting display but also give a control output that can be directly interfaced to further processing device. The applications are Inflow & outflow material with differential counting , counting of tool position with analogue output , display of real cutting length with rotary cut-to-length application, display of gap between two rollers & many more...
	Tachometers, Frequency meters, Timers
		Various industrial applications require tachometers, frequency meters & timers to display the respective parameters. Sometimes the parameter can be further processed with controlled output .Various applications are display of material line speed, measuring & recording of production speed , display of two flow speeds & ratio of mixtures , display of stretching factors & many more...
	Process Indicators
		Most of the process parameters are analogue in nature. A ready to use product with required features minimizes the complexity in system. Various applications are display of the fill volume in litres by measuring the bottom pressure & linearization, compensation of measuring errors and many more...
	SSI / Parallel Code Indicators
		SSI & parallel code is an absolute encoder technology. These indicators are used to display the absolute position of encoder. Applications are level display of lifting platform, measuring equipments , inspection machineries & many more...
	Monitors for speed , Standstill, Direction of rotation, Slip
		Controlled output with respect to monitoring parameter is the main feature of these monitors. Various applications like monitoring & control of gearbox backlash & shaft fracture , standstill monitoring for spindles , blades in turbines , control of speed in hoisting applications & many more...
	Convertors & Interface Units
		These unit are used for conversion of one process signal to another. As per the applications, possible conversions are - level converters HTL to TTL , Frequency dividers & multipliers to get variable PPR in encoder , encoder splitters & switchers , frequency to analogue , analogue to frequency , SSI to analogue & parallel code, incremental count to analogue etc.
	Display & preset switches for Profibus & CANbus
		These display & preset switches are used to display the specific parameter over a profibus or a CANbus.